How to Clean a Walk-in Tub

There’s nothing like having a walk-in tub in your home to improve your health, safety, and comfort. With a little time and care, you can keep it clean and well-maintained, so it will last for decades. 

Cleaning your tub regularly is not only easy, it keeps your tub safe, functional, and hygienic. It also prevents maintenance issues from becoming big problems in the future. 

Keep reading below for a few top tips to keeping your walk-in tub as clean as the day you bought it. 

Tip #1: Daily Cleaning 

The best and easiest way to keep your walk-in tub clean is by cleaning it daily. With just a little daily effort, you can prevent residue and gunk from building up over time, keeping your tub shiny and clean. Below are a few tips for cleaning your tub daily. 

 

Rinse Your Tub After Bathing

After your bath, give your tub a good rinse with warm to hot water. This stops residues like soap scum from building up. 

Gently Wipe Down Your Tub

After rinsing, wipe away any soap residue or oils with a damp cloth or paper towel. This keeps leftover residue from hardening and forming hard to remove scum on the surface of your tub. 

Tip #2: Give it a More Thorough Weekly Clean

On top of daily cleaning, give your tub extra attention and care once a week. This will make your daily cleaning even easier. Below are a few top tips for the perfect weekly clean. 

Use a Soft Sponge and Cleaner

Choose a non-abrasive and non-toxic cleaner that’s mild on your skin. Grab your washcloth or soft sponge and gently wipe down the surfaces of your tub. Avoid using anything abrasive like steel wool that will damage your tub’s acrylic surface. 

 

Clean the Hard-to-reach Surfaces

Put extra attention on your tub’s fixtures, including its showerheads, faucets, and handles. Clean the door seal well to stop any mildew from building up in the cracks. 

Tip #3: Give Your Tub and Jets a Monthly Deep Clean

Keeping your tub running in good shape is easy, especially if you stay on top of regular cleaning. By following the monthly cleaning steps below, you’ll handle any problems before they happen, saving you time, money, and stress. 

Keep Your Jets Running Smoothly

If your tub has jets, it’s important to keep them clean and maintained. You can do this easily by following the steps below. 

• Fill your tub with warm water so that at least two inches of water cover your tub’s jets. 
• Add ½ cup to 1 cup of bleach to the water in your tub. 
• Run your air jets for 10 minutes.
• Next, let your water jets run for another 10 minutes. 
• Drain your tub and rinse of any leftover bleach water. 

 

Give Your Tub a Monthly Soak 

Even if your tub doesn’t have jets, it’s important to give your tub an extra soak once a month. To do this,follow the steps below. 

• Fill your tub with warm water 
• Add a cup of bleach and mix it around. 
• Let your tub soak in the bleach and water mixture for 20 minutes. 
• Drain your tub and rinse it with warm water. 

Tip #4: Repair any Damage Immediately

Repairing damage right away is an important step in maintaining your tub. By doing so, you’ll stop a minor problem from becoming a bigger and more costly one. 

Check Your Tub’s Condition

Every day after using your tub, check for any cracks, leaks, or wear on your tub’s surface and fixtures. 

Repair Your Tub Immediately 

If you see any issues, it’s important to repair them immediately. Give your tub manufacturer a call so that they can help you choose the best method of repair. 

Ask a Professional for Help

For any major issues such as plumbing or wiring, it’s important to reach out to a professional. They will assess your tub’s condition and find any issues with your home plumbing right away. 

 

Check Your Tub’s Warranty

Walk-in tubs are built to last. You’ll rarely have issues if you follow regular cleaning and maintenance. 

However, if an unexpected problem arises with your tub, check your tub’s warranty service. Your tub manufacturer will help you get your tub up and running in no time as long as your tub is under warranty. 

Tip #5: Avoid These Common Mistakes 

In addition to regular cleaning, there are a few common mistakes to avoid. Staying clear of these pitfalls is easy and will help you preserve your tub’s condition. 

Steer Clear of Abrasive Products

Abrasive products like harmful detergents and hard bristles are too rough for your tub’s acrylic surfaces. Only use soft sponges or clothes, mild bleach, and soft detergents to clean your tub. 

 

Keep Your Tub’s Seals and Doors Clean

Seals and doors are tight spaces where mildew and grime can build up easily. Use a mild cleaner like a bleach and water solution and a soft sponge to clean these hard-to-reach spaces daily. 

By doing so, you’ll prevent any grime from building up inside which can corrode the seals and door surfaces. When this happens, it can make closing your tub door difficult and cause leaky seals. 

Don’t Forget to Care of Your Jets

Many tub owners forget to clean their jets. Regular cleaning will prevent costly grime buildups and blockages. 

Jets should only be used in water. Avoid running your jets when your tub is dry. This can damage your jets and lead to costly repairs. 

Avoid Oils in the Wrong Places

If you use aromatherapy oils, make sure to add them in designated compartments only. Too much oil in your tub will eventually cause damage to the seams and jets and could leave you with a costly maintenance bill. 

Conclusion

Keeping your walk-in tub functioning like new just takes a little extra care. This will prevent small issues from becoming big problems, which can lead to costly repairs and damage over time. 

Your walk-in tub is made to last a long time. By having one in your home, you’re investing in your health and comfort. 

 That’s why it’s important to do daily cleaning and give your tub extra attention and care once a month. This way, your walk-in tub will last a lifetime and stay looking as good as new.