I just had new tile installed in my bedroom bathroom and didn't want to drill through the tile. I was looking for an adhesive toilet paper roll that would aesthetically would match my faucet but would remain secure on my wall. The Empava self-adhesive toilet rool holder did just that

Excellent! No screws needed! Toilet paper holder has a very nice looking Stainless Steel / Brushed Nickel finish. Spindle will hold larger sized jumbo rolls up to 4-3/4 inches wide! Mounting is very easy. Heat the surfact and holder with a hair dryer, level and put in place. Let adhesive sit for 24 hours, then install toilet paper roll. Do not use on painted surfaces; Damage to paint will occur. The ease of installation is the #1 reason to get one now! A+++

The stainless steel toilet paper holder comes with 3M. Self sticking adhesive. You should clean the tiles with alcohol first so the tape could stick. It was so simple, my wife did it. We needed something closer to the toilet bow. But I did not want to drill holes into the tiles this was perfect. The stainless steel has a clean look to it that matches my handicap handrail.

I recently purchased a mobile home and didn't realize that the walls were not designed to put screws in for anything to hang on the wall. So instead i was putting my toilet paper on a small table. So glad i got this since. Works great since it's adhesive and holds really well. It looks just as nice as anything else you can buy. You can use it vertically or horizontally so you have options and, it holds even the mega rolls of toilet paper. Very pleased. Now i need to add one to my 2nd bathroom.

Opened the box and loved the look of toilet paper holder, however I used it to hand a hand towel over my toilet and it looked fantastic! Unfortunately, in the middle of the night I heard a splash, I walked into the bath to see towel and holder in the toilet. Not good. I might get some liquid nails from Home Depot to secure it back on the wall. Nothing was damaged.

This beautiful product was delivered in a nice white packaging. There are two sets of directions. One on the box, and the other inside. They each suggest differing instructions. No tools or drills are needed for installation. Quick and easy to do. I ended up securing the holder to the inside of my bathroom cabinet. I cut a roll of paper towels to the size of a toilet paper roller. Now, I have paper towels at my disposal with ease. I used to have a paper towel holder on the floor of my cabinet. My new holder saves me space and is so convenient.

If you're looking for a nice quality TP or towel holder and easy installation, this one fits the bill. Rich brushed nickel finish and lightweight but sturdy construction with 3M mounting tape included. Sticks firmly on our kitchen island base cabinet for easy reach of a dish towel. Simple solution that looks good and can be easily changed out, if you want a different look later. Think I'll get more for the bathrooms as well.

This review is for EMPAUA Self adhesive Stainless steel post wall mounted toilet paper roll holder , The holder is made of high-quality brushed , nickel stainless stainless steel can be easily installed on any hard surface such as tile, glass or metal cannot be used on sheet rock wood or painted walls is very easy to install just clean surface with rubbing alcohol dry off remove Paper on 3M self adhesive tape Mount to surface let's set up for 24 hours before using

Really Nice and Well Executed Bath Fixture ... the trick here is to make sure that your wall is flat and clean. The tape is crazy sticky, but if the wall is textured or dusty as they are out here in the Arizona desert, they this might not stay all that well and certainly not if one were to pull on it. You might want to put an anchor screw in the plate if you are not sure?

This holder offers a nice clean appearance. It seems solidly built with a thin mounting plate. What really makes it different is that it's a holeless mount, utilizing a double sided 3M adhesive patch. So there is no drilling of ceramic tile, or whatever, involved. Please allow 24hr for the adhesive to achieve full strength. It's labeled a TP holder but when I was deciding to mount it horizontally or vertically, it occurred to me maybe I could use it on the fiberglass tub/shower walls to hang things. Hmmm ?!